ME2252 MANUFACTURING TECHNOLOGY-II
Important Questions
PART-A
1.
Give two examples of orthogonal cutting
2.
What are the four important characteristics of materials used for cutting
tools?
3.
Why is it essential that the cutting point of the tool should be level with the
spindle
center while machining taper on a work-piece
4.
What is the difference between a ram type turret lathe and saddle type turret
lathe?
5.
Under what conditions planning operation would be preferred over other
machining
processes like milling, broching, shapping, etc
6.
What are the common work holding devices used on milling machines?
7.
What for lapping is used?
8.
State the abrasives used in the manufacture of grinding wheels.
9.
What is the difference between incremental and absolute system?
10.
What is the role of computer for NC machine tool?
11.What
are the factors responsible for built –up edge in cutting tools?
12.
What is electro chemical wear in tools?
13.
Mention four different types of chucks used in a machine shop.
14.
What is rake angle? What is the effect of nose radius in tools?
15.
What is up milling and down milling operations?
16.
Mention four important factors that influences the selection of grinding
wheels.
17.
What is roller burnishing process?
18.
Define NC
19.
Mention the major elements of NC machines.
20.
What you know about straight fluted drill and fluted drill?
PART-B
1.
Expain the geometry of single point cutting tool with suitable sketches
2.
Explain the basic actions of cutting fluids.
3.
During the orthogonal cutting, the following data where recorded
Back
rake angle = 25 deg
Chip
thickness = 0.15 mm/rev
Length
of chip = 40 mm
Length
of chip = 100 mm
Width
of chip before cut = 3.5 mm
Coefficient
of friction = 0.75
Cutting
speed Vc = 250 m/mm
Average
shear stress = 250 N/mm
Determine
power consumption.
4.
Explain the thread cutting operation in a lathe with a neat sketch. Also make a
note
on
knurling, grooving and forming operations in a lathe.
5.
Discuss the features of ram type and saddle type turret
6.
Explain the features of multi spindle automatics.
7.
With the sketches explain the features of the major elements of a twist drill
8.
Explain different types of milling cutters
9.
Make a note on different types of work holding devices used in a slotting
machine.
10.
Explain the different types of table drive and feed mechanisms in a planning
machine.
11.
Explain the salient features of a centre less grinding machine and discuss the
different
operations that can be carried out in it. Mention some advantages.
12.
Briefly discuss about different types of abrasives used in a grinding wheel.
13.
Explain the gear shaving, gear honing and gear lapping processes.
14.
Discuss the important design features of CNC machine tools.
15.
Write Short notes on:
i NC
machine tool classification
ii.
APT programming structure
iii
G and M codes
iv
CNC machine Vs Conventional machine
16.
Explain the conditions that promote the formation of the following types of
chip
i.
Continuous chips without built up edge
ii.
Continuous chips with built up edge
iii.
Discontinuous chip
17.
Define the Various tool parts of a single point cutting tool with a neat
sketch.
18.
What are the slandered angles of cutting tool? Illustrate with an example.
19.
Describe some of the methods and equipment for holding work on a lathe.
20.
Explain any four commonly used attachments on lathe.
21.
Briefly explain the principle of working of the sliding head type single
spindle
automatic
machine.
22.
Describe with neat sketch a turret automatic screw machine.
23.
State the advantages of Ward-Leonard drive.
24.
Explain with a sketch “Fast and Loose pulley” quick return mechanism of a
planer
table.
25.
State the methods of holding milling cutters.
26.
Explain simple indexing, compound indexing and differential indexing with
suitable
example.
27.
State the advantages and limitations of broaching.
28.
Compare gear hobbing with gear shaping.
29.
Explain self-sharpening characteristics of grinding wheel.
30.
Describe the use of cutting fluids in grinding.
31.
Explain wheel truing and dressing.
32.
State a few typical applications where the use of numerical control would be
justified.
33.
Describe in brief the basic components of a tape-operated NC machine tool.
34.
Discuss the advantages of computer numerical control system.
35. What is the
difference between positioning machines and contouring machines?